T2125 deep hole boring machine
I. basic process performance of machine tool:
1) drilling, boring, expanding and rolling of inner hole can be completed in this machine tool.
2) when machining, the workpiece rotates or the tool workpiece rotates at the same time, and the tool feeds to complete the cutting movement.
3) with cutting fluid filtration system.
4) machining accuracy of machine tool:
Drilling: hole diameter accuracy it10. Surface roughness: ≤ ra6.3 μ M
Coarse boring: aperture accuracy it10. Surface roughness: ≤ ra6.3 μ M.
When finishing boring: aperture precision it8. Surface roughness: ≤ ra3.2 μ M. Roundness: ≤ 0.03mm.
When rolling: aperture precision it8. Surface roughness: ≤ Ra0.4 μ M. Roundness: ≤ 0.03mm.
Straightness of machining hole: ≤ 0.15/1000mm.
5) machining efficiency of machine tool:
Cutting speed: determined according to the tool structure, material and workpiece material, generally 50-100m / min.
Feed speed: determined according to the workpiece processing diameter, workpiece material, heat treatment status and process conditions, generally 40-100mm / min.
Maximum machining allowance during boring: it is determined according to the structure, material and workpiece of the tool, generally no more than 20 mm.
Main technical specifications and parameters of machine tool:
|
technical specifications
|
parameter
|
|
T2125
|
|
Boring diameter range
|
Φ60-Φ250mm
|
|
Drilling diameter range
|
Φ40-Φ80mm
|
|
Machining depth range
|
1-12m(One specification per 1 m interval)
|
|
Working clamp diameter range
|
60-330mm
|
|
Spindle center height
|
350mm
|
|
Headstock spindle diameter
|
Φ75mm
|
|
Front end taper hole of main shaft
|
Φ85mm,1:20
|
|
Spindle speed range and series
|
61-1000r/min 12級
|
|
Diameter of main shaft of drill pipe box (optional)
|
75mm
|
|
Taper hole at the front end of main shaft of drill pipe box (optional)
|
Φ85mm,1:20
|
|
Transmission range and stages of main shaft of drill pipe box (optional)
|
80-350r/min 6級
|
|
Feed speed range (stepless)
|
5-1000mm/min
|
|
Fast moving speed of carriage
|
2m/min
|
|
Spindle motor
|
22kw
|
|
Hydraulic pump motor
|
N=1.5kw,n=1440r/min
|
|
Carriage fast motor
|
N=3kw,n=2880r/min
|
|
feed motor
|
N=3.7 kw n=18Nm(交流伺服)
|
|
Cooling pump motor
|
N=5.5 kw,N=1460r/min(4組)
|
|
Rated working pressure of cooling system
|
0.36MP
|
|
Cooling system flow
|
300L/min
|
|
Rated working pressure of hydraulic system
|
6.3MPa
|
|
Maximum axial force on the oil feeder
|
6.3KN
|
|
Maximum jacking force of oil feeder on workpiece
|
20KN
|
